BHDXJ - HEAT RESISTING ALUMINUM
- MSDS: BHDXJ
- Manufacturer: EVERSEAL MFG CO INC
- Product Name: HEAT RESISTING ALUMINUM
- National Stock Number: 8010-00-857-1938
Product Identification
Product ID:HEAT RESISTING ALUMINUM
MSDS Date:04/14/1987
FSC:8010
NIIN:00-857-1938
MSDS Number: BHDXJ
Responsible Party
RIDGEFIELD, NJ 07657-2329
US
Emergency Phone: 201-943-4986
Info Phone: 201-943-4986 / FAX 201-943-1123
Preparer: FRANK PRIMERANO
Cage: 72988
Contractor
Telephone: 201-943-4986
Cage: 72988
Ingredients
RESIN
Fraction By Weight: 17%
ALUMINUM (SARA III)
CAS: 7429-90-5
RTECS: BD0330000
Fraction By Weight: 23%
OSHA PEL 15MG/M3 DUST/5 FUME
ACGIH TLV: 10MG/M3 DUST; 9192
MINERAL SPIRITS
CAS: 64475-85-0
RTECS: PY8240000
Fraction By Weight: 25%
OSHA PEL 120 PPM
ALIPHATIC HYDROCARBONS
CAS: 64742-89-8
Fraction By Weight: 31%
OSHA PEL 150 PPM
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Medical Cond Aggravated by Exposure:INHALATION: DIZZINESS, NAUSEA,
POSSIBLE UNCONSCIOUSNESS MILDLY IRRITATING TO SKIN. IRRITATING TO
EYE
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR, APPLY ARTIFICIAL RESPIRATION
IF NECESSARY. SKINWASH WITH SOAP AND WATER. EYES: FLUSH WITH WATER.
CONSULT PHYSICIAN
Fire Fighting
Flash Point:50F/10C
Upper Limits:0.7
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Unusual Fire/Explosion Hazard:WATER NOT A SUITABLE EXTINGUSHING MEDIUM.
FIREFIGHTERS SHOULD WEAR
SELF-CONTAINED BREATHING APPARATUS.
Accidental Release
Spill Release Procedures:ENSURE ADEQUATE VENTILATION, REMOVE IGNITION
SOURCABSORB SMALL SPILLS ON DRY ABSORPTION MATERIAL. USE
SPARK-PROOF SCOOP FOR LARGER SPILLS
Handling
Handling and Storage Precautions:KEEP AWAY FROM MOISTURE. AVOID
EXCESSIVE HEAT KEEP AWAY FROM IGNITION SOURCES
Other Precautions:NPCA/HMIS RATING 3.3.0.H.
Exposure Controls
Respiratory Protection:IF TLV EXCEEDED USE CARTIDGE VAPOR MASK
Ventilation:SUFFICIENT TO ENSURE LEL NOT ACHIEVED
Protective Gloves:IMPERVIOUS
Eye Protection:GOGGLES
Other Protective Equipment:PROTECT SKIN WITH CLOTHING OR BARRIER CREAM
Supplemental Safety and Health
GAS BUILD-UP IS INDICATED BY BULGING CAN OR LID. CONSULT MANUFACTURER
IF THIS OCCURS
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:245-390 F
Vapor Density:> AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:74
Stability
Stability Indicator/Materials to Avoid:YES
ACIDS OR ALKALIES CAUSE VIOLENT REACTION. STRONG OXIDIZING MATERIALS
MOISTURE CAUSES HYDROGEN GAS BUILD UP
Stability Condition to Avoid:NA
Hazardous Decomposition Products:CARBON MONOXIDE/DIOXIDE ON COMBUSTION
Disposal
Waste Disposal Methods:AS PER LOCAL AND FEDERAL REGULATION FOR
HAZARDOUS MATERIAL
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.